PN RACING, MA0150 A-ARM FRONT SUSPENSION

PN RACING, MA0150 A-ARM FRONT SUSPENSION
Klik pada gambar untuk memperbesar
Kode Barang
MA0150
Merk
PN Racing
Harga
Rp 1.220.000,00
Berat
200 gram
Ketersediaan Barang
Habis

Lebih Lengkap Mengenai PN RACING, MA0150 A-ARM FRONT SUSPENSION

Unequal length A-arm suspension for MA010 chassis.
Modeled after full scale performance car suspension for realism.
Double A-arm suspension gives good control of suspension geometry during travel. Induce camber changes
during cornering.
Camber change keeps wheels near vertical for maximum tire contact with road. Allows for precise cornering
and maximum road holding.
Direct suspension swap
Front end width remains the same
Low profile suspension will work with low bodies like Ferrari Enzo that does not currently work in the AWD
chassis without cutting.
Ride height remains the same as stock
Suspension movement use ball joints and pivot pins instead of sliding knuckle. Eliminates stiction associated with sliding pin
especially with high offset wheels.
Low stiction results in consistent cornering.
Rigid ball joints instead of snap fit. Joints will not pop out even during hard collision.
No bump steer.
Use current MR02 or MA010 spring.
Adjustable camber from 0-1.3?X degrees with additional 1.3?X/mm of camber gain.
Adjustable caster from 0-2.3?X degrees
4 position adjustable upper A-arm pivot
Changes camber gain, static camber and roll center
Quick adjustment with set screw
Quick down stop adjustment with turn of a nut
Benefits of the sophisticated suspension system are precise cornering and maximum road holding which adds to mini-z driving
pleasure